組織を選択
Anypoint MQ Message Getting Processed Twice
公開日: Jul 17, 2025
解決策
SYMPTOM
Anypoint MQ appears to be delivering duplicate messages. The same message gets reprocessed twice or more with 2 minutes intervals via the MQ subscriber operation. This issue does not get observed if custom "Acknowledgement timeout" is configured, but happens with default "Acknowledgment timeout"CAUSE
The behavior is expected as the "Acknowledgement timeout" defined in the queue level does not get honored by MQ subscriber with AUTO ack mode. If the message processing time is over 2 minutes intermittently, the message is returned back to the queue for redelivery resulting in the same message getting processed more than once.An example MQ subscriber config is as below.
<anypoint-mq:subscriber doc:name="Subscriber" doc:id="2c2639bc-a27c-436e-bd21-c51b8285c600" config-ref="Anypoint_MQ_Config" destination="my-queue"> </anypoint-mq:subscriber>
SOLUTION
The recommended approach will be to define a different TTL for the acknowledgementTimeout in the subscriber configuration. The default TTL is two minutes. If you need a different TTL, you must define it explicitly in the acknowledgementTimeout parameter of the subscriber.<anypoint-mq:subscriber doc:name="Subscriber" doc:id="2c2639bc-a27c-436e-bd21-c51b8285c600" config-ref="Anypoint_MQ_Config" destination="my-queue" acknowledgementTimeout="5" acknowledgementTimeoutUnit="MINUTES"> </anypoint-mq:subscriber>
ナレッジ記事番号
001119407
この記事で問題は解決されましたか?
ご意見をお待ちしております。
