建立進階清單合併範例

下一個「整合程序」是上一個範例的修改版本。它不使用識別碼欄位比對清單項目,而是使用「進階合併」功能比對名字和姓氏。

1. 建立基本清單合併範例。
2. 複製 GetBirthdates Omnistudio 資料對應器並將其命名為 GetBirthdates2。在「輸出」索引標籤上,將 輸出 JSON 路徑值從 contact:firstName 變更為 contact:FN,並從 contact:lastName 變更為 contact:LN。
3. 在「整合程序」中的「DRExtractBirthdates」元件中,將「資料對應器介面」變更為「GetBirthdates2」。
4. 在「整合程序」的「清單動作」中,選取「進階合併」,然後將這些列新增至「進階合併對應」表格:

   清單索引鍵	比對路徑	比對群組
   DRExtractAddresses:contact	firstName	1
   DRExtractBirthdates:contact	FN	1
   DRExtractAddresses:contact	lastName	2
   DRExtractBirthdates:contact	LN	2

5. 在「預覽」索引標籤上,按一下「執行」。輸出類似此範例:

   {
     "contactMerge": [
       {
         "LN": "Jones",
         "FN": "Cathy",
         "birthdate": "1975-10-03",
         "street": "300 Broadway",
         "state": "FL",
         "city": "Orlando",
         "lastName": "Jones",
         "id": "0036100001E5xrWAAR",
         "firstName": "Cathy"
       },
       {
         "LN": "Jones",
         "FN": "Doug",
         "birthdate": "1976-10-04",
         "street": "400 Washington Blvd",
         "state": "AZ",
         "city": "Phoenix",
         "lastName": "Jones",
         "id": "0036100001E5xrvAAB",
         "firstName": "Doug"
       },
       {
         "LN": "Smith",
         "FN": "Albert",
         "birthdate": "1973-10-01",
         "street": "100 Main Street",
         "state": "CA",
         "city": "San Francisco",
         "lastName": "Smith",
         "id": "0036100001E5xqnAAB",
         "firstName": "Albert"
       },
       {
         "LN": "Smith",
         "FN": "Ben",
         "birthdate": "1974-10-02",
         "street": "200 Second Street",
         "state": "OR",
         "city": "Portland",
         "lastName": "Smith",
         "id": "0036100001E5xr2AAB",
         "firstName": "Ben"
       }
     ]
   }